What affects the cost
Cost depends on whether pipework and electrics need moving (not just swapping fixtures in place), the tiling area, fixture quality, and whether structural changes are needed (like removing a bath for a walk-in shower). Moving a toilet's position, in particular, is one of the more expensive changes because of the soil pipe work involved.
Noisy pipes and water hammer
A banging sound when a tap or toilet valve shuts off (water hammer) is usually caused by a pressure surge in the pipework, sometimes fixed by fitting a water hammer arrestor near the affected fixture rather than needing to replace pipework throughout.
Accessible and adapted bathrooms
Level-access showers, grab rails, and raised toilets are common accessibility adaptations, sometimes eligible for a Disabled Facilities Grant depending on circumstances. Planning these alongside a wider refit, rather than as a separate later job, usually costs less overall.
Walk-in showers and wet rooms, what's different
A walk-in shower needs careful floor falls (gradient) toward the drain to work without a shower tray — this is more technically demanding than fitting a standard shower tray and enclosure, and a poorly built one is a common source of water pooling or leaks. A full wet room takes this further, tanking the whole floor.
Three steps to hiring the right bathroom fitter
First, ask to see photos of similar completed jobs, ideally local ones. Second, clarify exactly who does the electrical and plumbing work — the fitter directly, or a subcontracted registered tradesperson. Third, get a written quote that separates labour, fixtures and tiling.
Shower screens vs shower curtains
A glass shower screen looks cleaner and is easier to maintain long-term than a curtain, but costs more and needs to be fitted correctly to avoid water escaping at the edges. A curtain is the cheaper, more flexible option, particularly for an over-bath shower.
What a good bathroom quote should include
A proper quote should specify the suite brand/model (not just "a toilet, a basin"), whether tiling and waterproofing are included, whether electrical and plumbing work is covered directly or subcontracted, and what happens if hidden pipework issues are found once the old suite is removed.
Choosing a bathroom suite
A close-coupled toilet is the standard, affordable choice. A wall-hung toilet looks sleeker and is easier to clean around but needs a concealed cistern built into the wall, adding cost and reducing space behind the wall for other services. Similar trade-offs apply to countertop vs inset basins.