Understanding the labour vs materials split
Units, worktop and appliances are often the largest share of a kitchen's total cost, but fitting labour, old kitchen removal, and making good around new services add up too. A cheap quote is worth checking against the same unit/worktop spec as competing quotes, not just lower labour.
Planning a kitchen-diner layout
Combining kitchen and dining space needs enough clearance around both the cooking area and the table for comfortable movement, and often benefits from a slightly different lighting and ventilation plan than a standalone kitchen — worth discussing how the space will be used for both cooking and eating before finalising layout.
Gas hobs need a Gas Safe engineer
Installing or moving a gas hob is gas work, same as a boiler, and legally needs a Gas Safe registered engineer, not just a kitchen fitter or general plumber. If you're switching from electric to gas (or vice versa) as part of a refit, this needs coordinating separately from the general fitting work.
Three steps to hiring the right kitchen fitter
First, ask to see photos of similar completed jobs. Second, clarify exactly who handles the electrical and plumbing work. Third, get a written quote that separates units, worktop, appliances and labour, so you can see where the money's actually going.
Knocking through for an open-plan kitchen
Removing a wall between a kitchen and adjoining room to create an open-plan space is a structural job, not just a kitchen fitting one — it needs a structural engineer's assessment and, if the wall is load-bearing, a supporting beam, plus building control sign-off. This is usually coordinated with, not done by, the kitchen fitter directly.
How many quotes should you get?
Three is reasonable for most kitchen jobs. For a full refit, make sure each quote specifies the same unit range and worktop material, since kitchen quotes vary enormously based on spec assumptions that aren't always stated clearly upfront.
Planning kitchen storage during a refit
Pull-out larders, corner carousel units, and drawer-based (rather than cupboard-based) storage all make better use of available space than standard cupboards, but need planning into the layout from the start rather than added afterwards. Worth discussing storage needs before finalising unit choices.
Aftercare after a kitchen refit
Keep electrical certification (for new circuits) and appliance warranties together with your kitchen paperwork. Check cabinet doors and hinges after a few months of use and re-adjust if needed — a normal part of settling in that most fitters will do free of charge shortly after completion.