Electricians in Camberwell

Local professionalsFree, no-obligation quotesDescribe your job once

Planning electrical work in Camberwell? Electricians cover repairs, new circuits, socket moves, lighting upgrades and testing. Provide a brief with access notes and any deadlines. You can then review quotes and pick the Electrician whose plan and schedule fit your project.

Share the details of your electrical project. Review quotes from electricians and pick the right fit for your schedule and budget. Describe your job and get quotes to find the right fit.

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

What affects the cost

Review these factors to see what can change the scope and quote for electricians.

  • Size of the property and number of circuits affected
  • Condition of the existing wiring and fuse box
  • How much chasing or surface trunking is needed
  • Access to voids, lofts and floors for cable routes
  • Testing requirements and certification for the work
  • Type of fittings and appliances being installed
  • Any making good to walls, ceilings or floors

Typical UK pricing guide

Typical guide prices (ballpark):

Prices below are adjusted for the London area, based on regional labour-cost data (ONS).

Emergency call-out hourly rate
GBP 91-114
GBP 1,707-7,397+

Costs can change with property size, access, condition and whether making good is needed.

Hiring checklist

This is a hiring checklist to use when comparing and hiring a Electrician for your job.

ELECTRICAL ESSENTIALS

Key things to consider for your electrical work

A quick guide to planning your project, understanding costs and choosing a good Electrician.

THE PROCESS EXPLAINED

What is an EICR and do I need one?

An Electrical Installation Condition Report checks a property's wiring against current safety standards and flags anything worn, damaged or non-compliant. Landlords are legally required to get one every 5 years; homeowners aren't, but it's worth having on an older property or one you've just bought where the wiring history is unknown.

HOW IT WORKS

LED lighting and energy-saving rewires

Swapping halogen downlights for LEDs is usually straightforward, but older dimmer switches often aren't compatible with LED drivers and need replacing alongside the bulbs, or you'll get flickering or a limited dimming range. If you're rewiring a room anyway, it's worth speccing LED-compatible circuits from the start rather than fixing dimmer compatibility later.

REGULATIONS & SAFETY

DIY electrical work vs when you need a professional

Under Part P of the Building Regulations, certain electrical work in a home is notifiable — it has to be carried out by a registered electrician who can self-certify it, or separately inspected by your council's building control. New circuits, consumer unit replacements, and any new work in a kitchen or bathroom are notifiable. Like-for-like socket or switch swaps usually aren't.

THE PROCESS EXPLAINED

How long does electrical work take?

A socket or switch swap is usually under an hour. A consumer unit replacement is typically a full day, often with the power off for several hours. A full rewire in an occupied property commonly takes 5 to 10 days depending on size and access, plus time afterwards for plastering and redecorating that isn't part of the electrical work itself.

USEFUL TO KNOW

Electrical safety for landlords

Since 2020, landlords in England must have an EICR carried out every 5 years and provide a copy to tenants. Failing to do so can result in a fine of up to £30,000. If an EICR flags unsatisfactory work, it has to be fixed within 28 days or a shorter period the report specifies.

HOW IT WORKS

Shared supplies in flats and converted buildings

In a converted property, it's worth checking whether your flat has its own independent consumer unit and meter, or shares a supply with other flats via a landlord's distribution board. Shared supplies can complicate straightforward jobs and sometimes need freeholder permission before any work starts — check this before booking rather than on the day.

THE PROCESS EXPLAINED

Smart meters and electrical work

If you're having a consumer unit replaced or a major rewire, it's worth telling your energy supplier in advance — work on the supply side sometimes needs the meter isolated by the network operator, not just your electrician, and this can take longer to arrange than the electrical work itself.

UNDERSTANDING THE JOB

Electrics in kitchens — circuits for appliances

A kitchen refit usually means new dedicated circuits for higher-draw appliances (oven, hob, dishwasher) rather than sharing a single ring main, plus RCD protection for anywhere near a sink. If you're changing the kitchen layout, plan socket and circuit positions before the units go in — moving them afterwards means lifting worktops or units again.

ABOUT THIS AREA

About Camberwell

Camberwell is an area of South London within the London Borough of Southwark, situated about 2.75 miles (4.5 km) southeast of Charing Cross and covered by the SE5 postcode district. The area began as a village associated with the church of St Giles and historically included surrounding hamlets; until 1889 it was part of Surrey and later formed the Metropolitan Borough of Camberwell before merging into Southwark in 1965. Modern Camberwell is smaller than the ancient parish and is bounded by Walworth, East Dulwich, Herne Hill, Kennington and Peckham. As part of Southwark, planning and building control are managed by the borough council. For homeowners and landlords, Camberwell’s mix of historic streets and infill development means trades serving SE5 should be competent with period‑property repairs, conversions and inner‑city logistics. Check whether conservation areas or listed buildings affect your property and whether contractors will need permits for scaffolding or restricted‑hour deliveries.


Electrical work in Camberwell

Camberwell’s SE5 area combines historic streets and infill developments, which means electricians here often tackle the dual challenge of upgrading old consumer units in period homes and installing modern circuits and EV chargers for newer flats and conversions. Inner‑city logistics matter: contractors should plan for limited parking, restricted‑hour deliveries and any Southwark Council permits for scaffolding or access. Because electrical work is notifiable under Part P, hiring a NICEIC or NAPIT registered electrician enables self‑certification and smoother compliance with borough building control.

An EICR is particularly valuable in Camberwell’s older properties to reveal degraded wiring, obsolete earthing or inadequate consumer units before a refurbishment or rental inspection. For modern conversions, expect demand for additional sockets, smart‑home wiring and dedicated EV‑charger circuits, while period conversions frequently need careful rewiring that respects finishes. When sourcing an electrician in Camberwell, ask for NICEIC/NAPIT registration, recent EICR examples on SE5 properties, and a practical access plan for vans and material deliveries. Ensure any electrician you hire will provide the required certification for Part P works and explain how they’ll handle Southwark Council notifications if needed.

Local professionals

Electricians in Camberwell

Finding the right electricians in Camberwell shouldn't be hard — here are some trusted local options. From routine checks to major rewiring projects, there's an electrician for the job.

Ratings and review counts shown are sourced from Google Business Profiles.

More local services

Other trades in Camberwell

Help

FAQs

Can you install additional circuits for a small job?
Yes. New circuits may be needed for high load appliances or extensions. The Electrician will assess capacity and route new cabling safely, then test and certify the work if required. Share the age of the property, access, and what you want to change so the Electrician can plan the right approach.
What is involved in a consumer unit replacement?
Replacing a consumer unit includes isolating power, fitting the new unit, connecting circuits and testing. Your Electrician should explain what protection devices are included and provide certification where required. It helps to note any existing issues, recent work, and the areas involved.
Is a safety check the same as an EICR?
An EICR is a formal safety inspection of fixed wiring and circuits. It checks for defects and compliance issues. A general safety check may be less detailed, so ask which report you will receive. Ask what is included, how long the work may take, and what happens if extra issues appear.
Will the work be disruptive?
Some jobs are quick, while others involve access to walls or floors. an electrician can explain the expected disruption and whether any making good will be needed after cables are run. Photos and measurements can help the Electrician give clearer guidance.
Do you need to see the property before quoting for a small job?
For simple jobs, a clear description and photos may be enough. For larger work such as rewires or new circuits, a site visit helps the Electrician provide an accurate scope and timeline. If relevant, confirm how services will be isolated and when they will be restored.
Can you fit extractor fans or bathroom electrics?
Yes, many electricians install extractor fans and bathroom fittings. Electrical work in bathrooms needs careful planning and suitable protection, so ask how the installation will be designed. Share the age of the property, access, and what you want to change so the Electrician can plan the right approach.