Electricians in The Mews

Local professionalsFree, no-obligation quotesDescribe your job once

Looking for an electrician in The Mews? Typical work includes adding sockets, replacing fittings, upgrading a fuse box and partial or full rewires. Describe the issue clearly and include photos if useful. Compare quotes on scope, materials and timing before you decide.

Tell us the scope, the property and any access notes. You can then compare quotes from electricians and move ahead with confidence. Describe your job and get quotes to compare experience.

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

What affects the cost

These factors help you compare quotes from electricians on a like-for-like basis.

  • Size and layout of the property, including number of rooms
  • Condition of the current electrics and any known issues
  • Number of new points or appliances to connect
  • Ease of access to walls, floors and ceilings
  • Type of fixtures and finish required
  • Testing and documentation requirements for the work
  • Repairs and finishing after cabling routes are installed

Typical UK pricing guide

Typical guide prices (ballpark):

Prices below are adjusted for the London area, based on regional labour-cost data (ONS).

GBP 3,414-13,656+
Emergency call-out hourly rate
GBP 91-114

Costs can change with property size, access, condition and whether making good is needed.

Hiring checklist

This is a hiring checklist to use when comparing and hiring a Electrician for your job.

ELECTRICAL KNOW-HOW

Advice to help with your electrical work

What you need to know to plan ahead, budget properly and hire the right Electrician.

HOW IT WORKS

New build and extension electrical work

Wiring an extension or new build from scratch is different from rewiring an existing room — it's planned around final wall positions and fittings before plastering, so timing with your builder matters. First-fix electrical work (cabling inside walls) has to happen before plastering; second-fix (sockets, switches, fittings) after.

RULES & STANDARDS

Three steps to hiring the right electrician

First, confirm they're registered with NICEIC or NAPIT and ask to see their registration number. Second, get a written quote that itemises labour and materials separately, not just a total. Third, ask what certificate you'll receive when the work's done — for notifiable work, you're entitled to a Building Regulations compliance certificate.

UNDERSTANDING THE JOB

What is an EICR and do I need one?

An Electrical Installation Condition Report checks a property's wiring against current safety standards and flags anything worn, damaged or non-compliant. Landlords are legally required to get one every 5 years; homeowners aren't, but it's worth having on an older property or one you've just bought where the wiring history is unknown.

UNDERSTANDING THE JOB

Christmas lights and extension lead safety

Overloading a single socket with extension leads and adaptors, especially outdoors or over the festive period, is one of the more common causes of a winter electrical fault. Outdoor lights need outdoor-rated (IP-rated) connectors, and it's worth having sockets checked before peak season if your property's wiring is older.

THE PROCESS EXPLAINED

Tripping fuses or flickering lights? Common causes

A breaker that trips repeatedly usually means a fault on a specific circuit, not the consumer unit itself — an electrician can isolate which circuit is affected. Flickering lights are often a loose connection rather than a faulty bulb, and worth having checked rather than ignored, particularly in older wiring.

UNDERSTANDING THE JOB

Garage and workshop power

Running power to a detached garage or workshop means an armoured cable, usually buried, and its own consumer unit or sub-board with RCD protection at the supply end. If you're planning to run power tools or an EV charger from it, size the supply for that from the start — upgrading later usually means digging the cable run up again.

THE PROCESS EXPLAINED

Wiring a loft conversion

A loft conversion typically needs new lighting and socket circuits, often a new consumer unit way if the existing one is already at capacity, and mains-wired interlinked smoke alarms are usually required by building control as part of the sign-off, not just recommended.

HOW IT WORKS

Shared supplies in flats and converted buildings

In a converted property, it's worth checking whether your flat has its own independent consumer unit and meter, or shares a supply with other flats via a landlord's distribution board. Shared supplies can complicate straightforward jobs and sometimes need freeholder permission before any work starts — check this before booking rather than on the day.

ABOUT THIS AREA

About The Mews

The Mews is recorded as a large town in Greater London within the SW18 postcode district. Although no population figure is supplied, its large_town designation implies an urban area of significant size. Local services and planning fall under the Greater London administrative system and the responsible borough. For customers searching for trades, the SW18 postcode refines searches to the Wandsworth/Putney catchment and helps match contractors familiar with local standards and access issues. The SW18 area commonly contains a mix of Victorian terraces, converted mews houses and modern apartments; as a result trades often undertake sash‑window repairs, flat refurbishments, roofing and damp‑proofing, and work in tight‑access properties where parking and loading need advance planning.


Electrical work in The Mews

The mix of Victorian terraces, converted mews houses and modern apartments in The Mews means electricians here commonly work across very different wiring scenarios within short distances. In older terraces and mews conversions expect boxed-in or original radial circuits, ageing consumer units and sometimes limited access for routing new cables in tight stairwells; in modern apartments the focus is more often on installing new socket circuits, lighting and EV charging provision for residents. Because electrical work is notifiable under Part P, many local electricians operate through competent‑person schemes such as NICEIC or NAPIT so they can self‑certify compliance and issue the necessary certificates without separate building‑control submission — this simplifies smaller jobs like new sockets and lighting.

EICR testing and certification are important where landlords or homeowners need documented safety checks after refurbishment or conversion work. Where full rewiring or consumer unit upgrades are required in period properties, electricians will advise on replacing old fuse boards with modern consumer units and may need to plan daytime access and parking because narrow streets and loading constraints in SW18 restrict large vans and equipment. Homeowners should ask for an up‑to‑date EICR and confirmation of competent‑person registration, and get a clear proposal showing whether work will be self‑certified or submitted to building control. Also check how the electrician plans to manage access, parking or deliveries on narrow streets and whether additional conduit or trunking will be needed in converted mews properties.

Local professionals

Electricians in The Mews

Looking for electricians near The Mews? Take a look at the local professionals below. From routine checks to major rewiring projects, there's an electrician for the job.

Ratings and review counts shown are sourced from Google Business Profiles.

More local services

Other trades in The Mews

Help

FAQs

Can you install additional circuits for a small job?
Yes. New circuits may be needed for high load appliances or extensions. The Electrician will assess capacity and route new cabling safely, then test and certify the work if required. Share the age of the property, access, and what you want to change so the Electrician can plan the right approach.
What is involved in a consumer unit replacement?
Replacing a consumer unit includes isolating power, fitting the new unit, connecting circuits and testing. Your Electrician should explain what protection devices are included and provide certification where required. It helps to note any existing issues, recent work, and the areas involved.
Is a safety check the same as an EICR?
An EICR is a formal safety inspection of fixed wiring and circuits. It checks for defects and compliance issues. A general safety check may be less detailed, so ask which report you will receive. Ask what is included, how long the work may take, and what happens if extra issues appear.
Will the work be disruptive?
Some jobs are quick, while others involve access to walls or floors. an electrician can explain the expected disruption and whether any making good will be needed after cables are run. Photos and measurements can help the Electrician give clearer guidance.
Do you need to see the property before quoting for a small job?
For simple jobs, a clear description and photos may be enough. For larger work such as rewires or new circuits, a site visit helps the Electrician provide an accurate scope and timeline. If relevant, confirm how services will be isolated and when they will be restored.
Can you fit extractor fans or bathroom electrics?
Yes, many electricians install extractor fans and bathroom fittings. Electrical work in bathrooms needs careful planning and suitable protection, so ask how the installation will be designed. Share the age of the property, access, and what you want to change so the Electrician can plan the right approach.