Electricians in Newcastle upon Tyne

Local professionalsFree, no-obligation quotesDescribe your job once

From replacing light fittings to planning a rewire, electricians take on a wide range of jobs in Newcastle upon Tyne. Provide a clear description, access details and your preferred timing. You can then compare quotes and choose an electrician who explains the scope in plain terms.

Provide a short description of your electrical job and availability. Compare quotes from electricians and select the option that works well for you. Describe the job and get quotes to check availability.

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

Get quotes from local electricians

Describe your job below — it takes under a minute.

Start your enquiry

What affects the cost

This list outlines what typically drives cost and complexity for electricians.

  • Age of the property and existing wiring condition
  • How much of the system is being changed or extended
  • Access to floors, ceilings and voids for cable routes
  • Type of fittings and appliances chosen
  • Requirement for testing, certification or notification
  • Any upgrades needed to meet current standards
  • Building work needed to make good after the installation

Typical UK pricing guide

Typical guide prices (ballpark):

Prices below are adjusted for the North East area, based on regional labour-cost data (ONS).

GBP 1,448-6,273+
GBP 2,895-11,580+
GBP 3,860-8,685

Costs can change with property size, access, condition and whether making good is needed.

Hiring checklist

This is a hiring checklist to use when comparing and hiring a Electrician for your job.

ELECTRICAL BASICS

Getting your electrical work right

Advice to help you get organised, understand what things cost and find a reliable Electrician.

THE PROCESS EXPLAINED

First fix and second fix, explained

On a rewire or new build, "first fix" is running cables through walls and floors before they're closed up; "second fix" is fitting sockets, switches and light fittings once decorating is done. Getting the timing right with other trades on site avoids cables being covered before they're tested.

UNDERSTANDING THE JOB

New build and extension electrical work

Wiring an extension or new build from scratch is different from rewiring an existing room — it's planned around final wall positions and fittings before plastering, so timing with your builder matters. First-fix electrical work (cabling inside walls) has to happen before plastering; second-fix (sockets, switches, fittings) after.

THE PROCESS EXPLAINED

Electrics in kitchens — circuits for appliances

A kitchen refit usually means new dedicated circuits for higher-draw appliances (oven, hob, dishwasher) rather than sharing a single ring main, plus RCD protection for anywhere near a sink. If you're changing the kitchen layout, plan socket and circuit positions before the units go in — moving them afterwards means lifting worktops or units again.

RULES & STANDARDS

Rewiring a listed or period property

Listed building consent can be needed for chasing cable runs into original plaster or masonry, even though the electrical work itself is assessed the same way as any other property under Part P. Conduit and surface-mounted cabling are sometimes used instead of chasing into walls specifically to avoid this — worth discussing with an electrician who's worked on listed properties before.

UNDERSTANDING THE JOB

When does a consumer unit need replacing?

Older fuse boxes with rewireable fuses or plastic (rather than metal) casings don't meet current wiring regulations and are a common reason a rewire quote comes in higher than expected. A modern consumer unit uses RCBOs, which cut power to a single faulty circuit rather than the whole property.

UNDERSTANDING THE JOB

Christmas lights and extension lead safety

Overloading a single socket with extension leads and adaptors, especially outdoors or over the festive period, is one of the more common causes of a winter electrical fault. Outdoor lights need outdoor-rated (IP-rated) connectors, and it's worth having sockets checked before peak season if your property's wiring is older.

HOW IT WORKS

Common electrical jobs

Electricians handle everything from minor repairs to full rewires: replacing a consumer unit to meet current wiring regulations, adding or moving sockets and light switches, installing an EV charging point, fixing faults such as tripping breakers or flickering lights, and full or partial rewires in older properties.

SAFETY & COMPLIANCE

Workmanship guarantees on electrical work

Registered electricians typically offer a workmanship guarantee separate from any manufacturer's warranty on parts like consumer units or EV chargers — usually 12 months upwards. Ask what's covered specifically: a guarantee on a rewire should cover the whole job, not just the final connection.

ABOUT THIS AREA

About Newcastle upon Tyne

The Tyne's bridges and the steep banks either side of the river define central Newcastle in a way few other English cities can match. Grand Victorian and Georgian terraces sit in the centre and inner suburbs, with inter-war and post-war housing further out and newer riverside apartment schemes closer to the water. The steep gradient between the river and the upper town affects access and parking for a lot of central jobs, while riverside conversions bring the same lift and building-management considerations seen in other regenerated dockland areas. A job description here benefits from noting whether it's on the flat upper streets or down toward the quayside.


Electrical work in Newcastle upon Tyne

Newcastle’s mix of grand Victorian and Georgian terraces, inter-war suburbs and riverside apartment schemes shapes the kind of electrical work homeowners typically need. In older terraces and period houses the wiring layout may be historic, tucked into cornices or running through solid walls, which often means full or partial rewires and consumer unit upgrades to meet modern safety standards; in contrast, riverside apartments and newer riverside blocks are where homeowners more often ask for EV charger installation, additional circuits for smart-home systems and new lighting schemes. The steep drop from the upper town down to the quayside also affects access and how electricians bring equipment on site — installers may need to confirm lift access or tighter parking for vans when quoting for work in lower-river locations.

Part P of Building Regulations makes certain electrical jobs notifiable; hiring an electrician who is registered with a competent-person scheme such as NICEIC or NAPIT allows them to self-certify compliance, simplifying building-control notifications and avoiding delays. EICR testing is important in older properties to identify unsafe circuits before starting upgrade work, and consumer unit replacement is commonly required where fuseboxes or old breakers are still in place. When sourcing an electrician in Newcastle upon Tyne, ask for proof of competent-person registration, an up-to-date EICR if the property is older, and clear confirmation of how they will manage access or lift use at quayside addresses; expect quotes to note whether work is on the upper streets or down by the river.

Local professionals

Electricians in Newcastle upon Tyne

Need a reliable electricians in Newcastle upon Tyne? These local professionals are ready to help. Expect everything from small repairs to complete electrical installations.

Ratings and review counts shown are sourced from Google Business Profiles.

More local services

Other trades in Newcastle upon Tyne

Help

FAQs

What does an electrician do in a home?
Electricians handle repairs, fault finding, new sockets, lighting changes, consumer unit upgrades and new circuits. They can also carry out safety inspections and provide certificates where required. For larger projects, they can advise on partial or full rewires.
Do I need a qualified Electrician for small jobs?
Electrical work can be risky and some tasks are controlled by regulation. A qualified Electrician will isolate power safely, test the work and provide any required paperwork. For most jobs, professional help is the safest route.
What is an EICR?
An Electrical Installation Condition Report is a safety check of fixed wiring and circuits. It identifies potential hazards and highlights items that need attention. Homeowners may choose one for reassurance, and landlords often require it for rented properties.
Will I receive a certificate after the work?
Some electrical work requires testing and certification, especially new circuits or consumer unit changes. Ask what documents will be provided and keep them with your property records. Certificates can be useful for future sales or insurance queries.
How long will an electrical job take?
Timescales depend on the scope and access. A single fitting can be quick, while new circuits or rewiring takes longer. an electrician can estimate the duration once they understand the job and any access limits.
What information helps with a quote?
Share the job details, property type, number of points or circuits and any access issues. Photos of the consumer unit or the area can help. If you want the Electrician to supply fittings, mention that too.