Seasonal roof checks worth doing
Before winter: check for loose tiles and clear gutters, since blocked gutters and ice are a common combination for damage. After a storm: a visual check from the ground for obvious damage, before assuming everything's fine just because there's no visible leak yet.
What affects the cost
Cost depends on roof size and pitch (steeper roofs need more scaffolding and take longer), the material (slate costs more than concrete tile), access, and whether the existing roof structure (timbers, felt) needs work too, not just the visible covering. A straightforward repair is quick; a full re-roof including scaffolding commonly takes 1-3 weeks.
How many quotes should you get?
Three is reasonable for most roofing jobs. For a full re-roof, make sure each quote specifies the same tile/material and includes or excludes scaffolding consistently — roofing quotes vary more than some trades simply because of what's included or left out.
Why roofing work is weather-dependent
Roofers generally can't safely work in high winds, heavy rain, or icy conditions, so scheduled roofing jobs sometimes shift by a few days around bad weather — factor this into timing if you need work finished by a specific date, particularly in autumn/winter.
Understanding the labour vs materials split
Materials (tiles, felt, leadwork, scaffolding hire) are often a smaller share of a re-roof quote than labour, particularly given the time and access involved. A cheap quote is worth checking for the same tile/material spec as competing quotes, not just a lower labour day rate.
Domestic vs commercial roofing work
Most roofers who work on homes also cover garages, outbuildings and small extensions, but larger commercial flat-roof work (warehouses, larger extensions) sometimes needs a roofer with specific experience in bigger membrane systems. Worth asking directly if your job is unusually large or non-standard.
Roof orientation and solar suitability
A south-facing roof slope generally gets the most useful sun for solar panels, though east/west-facing roofs can still work reasonably well. A roofer or solar installer assessing suitability will look at pitch, orientation, shading from nearby trees or buildings, and roof structural capacity together.
Leadwork around chimneys and valleys
Lead flashing seals the joins where a roof meets a chimney, wall, or valley — a very common source of leaks when it perishes or is poorly installed, even if the roof tiles themselves are fine. If a leak keeps recurring in the same spot near a chimney, it's often the leadwork rather than the tiles that needs attention.