Planning bin storage properly
Built-in pull-out bin drawers, sized for recycling separation, are far easier to plan into a layout during a refit than to add afterwards — worth deciding on bin capacity and separation needs (general waste, recycling, food waste) before cabinet layout is finalised, not after.
Kitchen lighting layers
A well-lit kitchen usually combines general ceiling lighting, task lighting (under-cabinet lights over worktops, where most food prep happens), and sometimes accent lighting — a single central ceiling light alone often leaves worktops in shadow. Worth planning lighting circuits before, not after, unit installation.
Kitchen ventilation and extraction
An extractor hood vented to the outside removes cooking odours and moisture more effectively than a recirculating (filter-only) hood, but needs ducting planned into the layout — easier to arrange during a full refit than retrofit afterwards. Building Regulations require adequate ventilation in kitchens generally.
Food waste disposal units, what to know
An under-sink food waste disposal unit needs its own electrical connection and specific plumbing configuration — not every kitchen sink setup can accommodate one without modification, so it's worth deciding early in the planning rather than as an afterthought once plumbing is first-fixed.
Gas hobs need a Gas Safe engineer
Installing or moving a gas hob is gas work, same as a boiler, and legally needs a Gas Safe registered engineer, not just a kitchen fitter or general plumber. If you're switching from electric to gas (or vice versa) as part of a refit, this needs coordinating separately from the general fitting work.
Respraying or painting existing units
Professionally sprayed cabinet doors can refresh a kitchen's look at a fraction of full replacement cost, provided the existing doors are a suitable material (solid wood or properly primed MDF, not all laminates take a respray well) — worth asking a fitter to assess suitability before committing either way.
Knocking through for an open-plan kitchen
Removing a wall between a kitchen and adjoining room to create an open-plan space is a structural job, not just a kitchen fitting one — it needs a structural engineer's assessment and, if the wall is load-bearing, a supporting beam, plus building control sign-off. This is usually coordinated with, not done by, the kitchen fitter directly.
Background checks and identity verification
Since kitchen fitting isn't gated by a single mandatory certification, checking trading history, a verifiable business address, and reviews referencing specific completed jobs matters more here than for trades with a clear registration body.