What a good heating quote should include
A proper quote should specify the boiler make and model (not just "a combi boiler"), whether a powerflush is included, the warranty length, and what certificate you'll receive on completion. If a quote is missing the boiler model, ask before agreeing.
Gas safety duties for landlords
Landlords must have a valid Gas Safety Certificate (CP12) renewed every 12 months for any gas appliance in a rented property, and provide a copy to tenants. It's a legal requirement, and letting agents/insurers routinely check for it — failing to have one can invalidate insurance and result in prosecution.
Heating emergencies — what to do
If you smell gas, don't use any electrical switches, don't light a flame, turn off the gas supply at the meter if it's safe to reach, and call the National Gas Emergency Service on 0800 111 999 before calling a heating engineer. For no heat or hot water without a gas smell, check the boiler pressure and any error code before assuming a full breakdown.
Heating in older and period properties
Older properties often have narrower pipework, no cavity wall insulation, and sometimes a heating system not originally designed for full central heating throughout — all of which affect boiler sizing and radiator choice. A heating engineer working on a period property will usually assess the whole system, not just swap the boiler in isolation.
How many quotes should you get?
Three is a reasonable number for a boiler replacement — enough to compare boiler models and warranty terms without over-surveying for a job that's fairly standardised. Make sure each quote is for a comparable boiler tier, since price differences often just reflect different equipment.
Three steps to hiring the right heating engineer
First, confirm Gas Safe registration and ask to see the ID card, which lists exactly what gas work they're qualified for. Second, get a written quote naming the boiler model. Third, ask what the manufacturer's warranty requires (usually an annual service) to keep it valid.
Solar thermal (hot water) systems
Solar thermal panels heat water directly (different from solar PV, which generates electricity) and work alongside a conventional boiler or immersion heater as backup for when there isn't enough sun. They need a compatible cylinder with an extra heating coil, so retrofitting to an existing system isn't always straightforward.
Combi vs system vs conventional boilers
A combi heats water on demand with no tank or cylinder, suits smaller properties with one bathroom. A system boiler uses a hot water cylinder but no cold water tank, better where several taps might run at once. A conventional (regular) boiler uses both a tank and cylinder, common in older or larger properties, or where mains pressure is poor.