Why an annual boiler service matters
An annual service checks for gas leaks, correct combustion, and general safety, and most manufacturer warranties require it to stay valid. It's also when a heating engineer is most likely to catch a developing fault — a failing part or a a pressure issue — before it causes a breakdown, particularly in winter when boilers are used hardest.
First fix and second fix heating work
On a new build or extension, "first fix" is running pipework to radiator and boiler positions before walls are closed up; "second fix" is fitting radiators, thermostats and the boiler itself once decorating is done. Getting boiler flue routing agreed early avoids conflicts with other trades later.
Air source heat pumps, what to know
A heat pump extracts heat from outside air even in cold weather, and typically runs at a lower flow temperature than a gas boiler, which usually means larger radiators or underfloor heating for the same comfort level. Installation is a bigger job than a boiler swap and government grant schemes (like the Boiler Upgrade Scheme) can offset some of the cost.
Red flags in a cheap heating quote
A quote well below others is worth questioning — check it specifies a named boiler make and model (not just "combi boiler"), includes a powerflush if the system is older, and states the warranty length. No Gas Safe registration number offered unprompted is a clear red flag.
What a good heating quote should include
A proper quote should specify the boiler make and model (not just "a combi boiler"), whether a powerflush is included, the warranty length, and what certificate you'll receive on completion. If a quote is missing the boiler model, ask before agreeing.
Common heating engineer jobs
Heating engineers install, service and repair boilers and central heating systems: annual boiler services, fault diagnosis, radiator installation and balancing, powerflushing, and full system replacements. Many also work on unvented hot water cylinders and, increasingly, heat pumps and other low-carbon heating.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
Electric boilers, pros and cons
Electric boilers avoid combustion entirely (no flue, no CO risk, no Gas Safe requirement) but electricity typically costs more per unit than gas, so running costs can be higher for the same heat output. They suit smaller properties or as a backup rather than being the default choice for most UK homes.