Three steps to hiring the right heating engineer
First, confirm Gas Safe registration and ask to see the ID card, which lists exactly what gas work they're qualified for. Second, get a written quote naming the boiler model. Third, ask what the manufacturer's warranty requires (usually an annual service) to keep it valid.
What is a powerflush and do you need one?
A powerflush clears sludge and debris from radiators and pipework using a pumped chemical flush — often recommended if radiators are cold at the bottom or the system is noisy, and standard practice before fitting a new boiler onto an older system so it isn't immediately clogged.
Gas fires and stoves — same Gas Safe rule applies
Installing or servicing a gas fire, gas stove, or gas oven/hob is gas work under the same legal framework as a boiler — it must be done by a Gas Safe registered engineer qualified in that specific appliance category, not just any gas-qualified engineer, since categories are appliance-specific.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
What affects the cost
Cost depends on the type of system (combi vs system vs conventional), whether it's a straightforward swap or a full system change, boiler brand and output size, and property access. Moving a boiler's location, rather than replacing it in place, adds cost because of the extra pipework, flue routing and making good involved.
First fix and second fix heating work
On a new build or extension, "first fix" is running pipework to radiator and boiler positions before walls are closed up; "second fix" is fitting radiators, thermostats and the boiler itself once decorating is done. Getting boiler flue routing agreed early avoids conflicts with other trades later.
How heating engineer quotes work
Describe the current system (boiler type and age, number of radiators, any known faults) and heating engineers can give an initial estimate; the firm price usually follows a site visit, since pipework condition and access aren't always obvious from a description alone.
Does boiler brand matter?
Established UK brands generally have wider parts availability and more Gas Safe engineers familiar with servicing them, which matters for future repairs, not just the initial install. Ask your engineer which brands they work with most, since familiarity affects diagnosis speed on future call-outs too.