Bathroom Fitters in Ellon

Local professionalsFree, no-obligation quotesDescribe your job once

Bathroom projects in Ellon can range from replacing a suite to a full refit. Bathroom Fitters fit baths, showers, toilets and basins and complete tiling and finishing. Provide the room size, layout and any access limits to keep quotes realistic and comparable.

Planning a refit? Share bathroom details, room size and fixtures so you can compare like for like pricing and scope. Describe your job and get quotes to compare experience.

Get quotes from local bathroom-fitters

Describe your job below — it takes under a minute.

Start your enquiry

Get quotes from local bathroom-fitters

Describe your job below — it takes under a minute.

Start your enquiry

What affects the cost

This checklist covers the main factors that affect scope and price.

  • Lead time for ordering bespoke or made-to-measure fittings
  • Whether the job needs Part P certification for new electrical circuits
  • Condition of the subfloor and whether it needs strengthening
  • Tiling area and whether existing tiles need removing first
  • Making good walls and ceilings disturbed by pipework changes
  • Whether a wet room or level-access shower is being installed
  • Coordinating trades if plumbing, tiling and electrics are done separately

Typical UK pricing guide

Typical guide prices (ballpark):

Prices below are adjusted for the Scotland area, based on regional labour-cost data (ONS).

Costs can change with property size, access, condition and whether making good is needed.

Hiring checklist

Use this checklist when comparing and hiring for your job.

BATHROOM GUIDE

Making sense of your bathroom project

Guidance to help with planning, costs and finding the right Bathroom Fitter for the job.

USEFUL TO KNOW

Heated towel rails, electric vs plumbed

A plumbed towel rail runs off the central heating system and only heats when the heating's on (unless dual-fuel with an electric element added). An electric-only rail can run independently year-round. Dual-fuel gives the most flexibility but costs more and needs both connections.

USEFUL TO KNOW

First fix and second fix in a bathroom refit

"First fix" is pipework and electrical cabling before tiling; "second fix" is fitting the suite, taps and electrics once tiling is done. Getting this sequence right matters — pipework needs to be pressure-tested and electrics first-fixed before the room is tiled over.

SAFETY & COMPLIANCE

Bathroom plumbing work and WaterSafe

Moving or adding plumbing (a new shower, relocated toilet) should follow Water Fittings Regulations, the same rules a WaterSafe-registered plumber works to. If your bathroom fitter isn't a registered plumber themselves, ask who does the plumbing side and whether they're WaterSafe registered.

GOOD TO KNOW

Bath vs shower-only, deciding for resale value

Removing the only bath in a property to fit a larger shower can affect resale appeal to buyers with young children, even if it suits your current needs better. Worth considering if this is your only bathroom and you're not planning to stay long-term.

UNDERSTANDING THE JOB

Planning an en-suite bathroom

Adding an en-suite usually means extending plumbing and sometimes electrical circuits into a new area, and ventilation (an extractor fan, by regulation) becomes more important in a smaller enclosed space. Worth planning the layout around existing pipe runs where possible to control cost.

GOOD TO KNOW

Walk-in showers and wet rooms, what's different

A walk-in shower needs careful floor falls (gradient) toward the drain to work without a shower tray — this is more technically demanding than fitting a standard shower tray and enclosure, and a poorly built one is a common source of water pooling or leaks. A full wet room takes this further, tanking the whole floor.

WORTH KNOWING

How long does a bathroom refit take?

A fixture swap (like-for-like toilet or basin) is usually a day or two. A full bathroom refit including tiling and waterproofing commonly takes 1-2 weeks, and it's often the only bathroom in the property out of use for that period — worth planning around if you only have one.

REGULATIONS & SAFETY

Bathroom regulations, FAQ

Do I need building control sign-off for a bathroom refit? Usually not for a like-for-like refit, but new electrical circuits or moving significant plumbing may need it, handled via the relevant registered tradesperson. Can I do my own tiling? Yes, tiling itself isn't regulated — it's the electrics and plumbing behind it that are.

LOCAL GUIDE

About Ellon

Ellon is a town in Aberdeenshire with a 2022 population of 10,126 and sits in the AB41 postcode district. Lying about 16 miles north of Aberdeen on the River Ythan, it occupies part of the historic Formartine area; its name derives from the Gaelic Eilean, reflecting the town’s historical position at a river ford. Ellon’s location beside one of the few relatively undeveloped river estuaries on Scotland’s east coast gives it notable natural surroundings while placing it within Aberdeenshire Council’s jurisdiction for services and planning. For trades and contractors this scale and setting means a healthy local market — many trades will service Ellon regularly — but riverine and estuary proximity can raise considerations for drainage, damp-proofing and exterior finishes. When sourcing tradespeople, expect good van access and a wide pool of local contractors; still verify experience with riverside properties and Aberdeenshire building-control requirements for projects affecting foundations or flood-risk areas.


Bathroom fitting in Ellon

Bathroom projects in Ellon frequently involve upgrading older plumbing runs and addressing moisture issues exacerbated by the town’s riverine environment, particularly in ground‑floor or basement bathrooms. Older properties may require rerouting pipework and subfloor strengthening before tiling, while modern homes and extensions often look for wet‑room solutions or level‑access showers to improve accessibility. Proper waterproofing and tanking beneath tiles is essential in a damp-prone area, and extractor fans must meet Part F ventilation requirements to control humidity and prevent mould.

Any electrical work in the bathroom is notifiable under Part P and should be carried out by a registered electrician to ensure safe installation. When planning a refit, ask bathroom fitters for examples of waterproofing details they use where moisture risk is higher and whether they coordinate with registered electricians for safe electrical installation. Also request a clear scope covering pipework changes, floor strengthening if needed, and ventilation strategies to protect finishes long term.

More local services

Other trades in Ellon

Help

FAQs

Will you check water pressure for your property?
a bathroom-fitter can check water pressure if needed, especially for showers. Mention any pressure issues in your request. If relevant, confirm how services will be isolated and when they will be restored. Share the age of the property, access, and what you want to change so the Bathroom Fitter can plan the right approach.
Do I need building control for bathroom work?
Rules vary depending on the scope and location. It is sensible to discuss the work with your Bathroom Fitter and check local requirements if needed. Share the age of the property, access, and what you want to change so the Bathroom Fitter can plan the right approach.
Can you install a new extractor fan?
Some fitters can, but electrical work may need a qualified electrician. Ask what is included in the quote. It helps to note any existing issues, recent work, and the areas involved. Ask what is included, how long the work may take, and what happens if extra issues appear.
Will the work be messy?
There can be dust and disruption during a refit. Ask how the Bathroom Fitter will protect nearby rooms and manage clean up. Ask what is included, how long the work may take, and what happens if extra issues appear.
What if I find hidden damage for your property?
If hidden issues are found, the Bathroom Fitter should explain options before proceeding. Extra repairs may be needed. Photos and measurements can help the Bathroom Fitter give clearer guidance. If relevant, confirm how services will be isolated and when they will be restored.
Can you fit accessibility features?
Some fitters can install grab rails or lower profile trays. Explain any accessibility needs so the scope is clear. If relevant, confirm how services will be isolated and when they will be restored. Share the age of the property, access, and what you want to change so the Bathroom Fitter can plan the right approach.