Planning a kitchen-diner layout
Combining kitchen and dining space needs enough clearance around both the cooking area and the table for comfortable movement, and often benefits from a slightly different lighting and ventilation plan than a standalone kitchen — worth discussing how the space will be used for both cooking and eating before finalising layout.
Kitchens as part of a wider extension
A kitchen fitted as part of a house extension needs closer coordination between the builder and kitchen fitter on timing — services (electrics, plumbing, ventilation ducting) need to be roughed in during the build phase, before the kitchen fitter's own first-fix stage begins.
Kitchen layout, the "working triangle" and beyond
The traditional advice is to keep the sink, hob and fridge in an efficient triangle so you're not crossing the kitchen constantly while cooking — still a useful starting point, though open-plan and island layouts sometimes work better with a different logic. Worth discussing how you actually use a kitchen day to day, not just the theory.
Why an in-person survey matters for kitchens
Walls and floors are rarely perfectly square, especially in older properties, and a survey catches this before units are ordered to a size that won't actually fit cleanly. Skipping a proper survey in favour of a quick estimate is a common cause of on-site problems during fitting.
Adding a kitchen island, what to consider
An island needs enough surrounding clearance to be usable (not just fit), and if it includes a sink or hob, plumbing and electrics need to reach it — often via the floor, which is far easier to plan during a full refit than retrofit into an existing floor later.
Knocking through for an open-plan kitchen
Removing a wall between a kitchen and adjoining room to create an open-plan space is a structural job, not just a kitchen fitting one — it needs a structural engineer's assessment and, if the wall is load-bearing, a supporting beam, plus building control sign-off. This is usually coordinated with, not done by, the kitchen fitter directly.
Planning bin storage properly
Built-in pull-out bin drawers, sized for recycling separation, are far easier to plan into a layout during a refit than to add afterwards — worth deciding on bin capacity and separation needs (general waste, recycling, food waste) before cabinet layout is finalised, not after.
Planning kitchen storage during a refit
Pull-out larders, corner carousel units, and drawer-based (rather than cupboard-based) storage all make better use of available space than standard cupboards, but need planning into the layout from the start rather than added afterwards. Worth discussing storage needs before finalising unit choices.