Red flags in a cheap heating quote
A quote well below others is worth questioning — check it specifies a named boiler make and model (not just "combi boiler"), includes a powerflush if the system is older, and states the warranty length. No Gas Safe registration number offered unprompted is a clear red flag.
Common heating engineer jobs
Heating engineers install, service and repair boilers and central heating systems: annual boiler services, fault diagnosis, radiator installation and balancing, powerflushing, and full system replacements. Many also work on unvented hot water cylinders and, increasingly, heat pumps and other low-carbon heating.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
Frozen condensate pipes in winter
A frozen condensate pipe (the small plastic pipe draining from a condensing boiler, often outside) is one of the most common winter boiler breakdowns — it causes the boiler to shut down as a safety measure. Pouring warm (not boiling) water over the pipe to thaw it, if safely accessible, sometimes fixes this without a call-out.
Why Gas Safe registration is a legal requirement
Anyone installing, servicing or repairing a gas appliance or gas pipework in the UK must by law be on the Gas Safe Register, which replaced CORGI in 2009. This covers boilers, gas fires and gas cookers. Using an unregistered engineer for gas work isn't just risky, it's illegal, and any resulting certificate isn't valid.
Water-based underfloor heating and your boiler
A water-based underfloor heating system runs off the boiler via a manifold, usually at a lower flow temperature than radiators, and needs the floor buildup to accommodate the pipework. It's often more efficient paired with a heat pump than a gas boiler, because of that lower operating temperature.
Heating in older and period properties
Older properties often have narrower pipework, no cavity wall insulation, and sometimes a heating system not originally designed for full central heating throughout — all of which affect boiler sizing and radiator choice. A heating engineer working on a period property will usually assess the whole system, not just swap the boiler in isolation.
What a good heating quote should include
A proper quote should specify the boiler make and model (not just "a combi boiler"), whether a powerflush is included, the warranty length, and what certificate you'll receive on completion. If a quote is missing the boiler model, ask before agreeing.