Gas fires and stoves — same Gas Safe rule applies
Installing or servicing a gas fire, gas stove, or gas oven/hob is gas work under the same legal framework as a boiler — it must be done by a Gas Safe registered engineer qualified in that specific appliance category, not just any gas-qualified engineer, since categories are appliance-specific.
Heating emergencies — what to do
If you smell gas, don't use any electrical switches, don't light a flame, turn off the gas supply at the meter if it's safe to reach, and call the National Gas Emergency Service on 0800 111 999 before calling a heating engineer. For no heat or hot water without a gas smell, check the boiler pressure and any error code before assuming a full breakdown.
What a boiler fault code usually means
Modern boilers display a fault code rather than just stopping — the exact code varies by manufacturer, but common causes include low pressure, a faulty sensor, an ignition fault or condensate pipe freezing in cold weather. Note the code and the boiler make/model before calling; it speeds up diagnosis considerably.
Why an annual boiler service matters
An annual service checks for gas leaks, correct combustion, and general safety, and most manufacturer warranties require it to stay valid. It's also when a heating engineer is most likely to catch a developing fault — a failing part or a a pressure issue — before it causes a breakdown, particularly in winter when boilers are used hardest.
Shared heating systems in flats and conversions
Some converted properties share a communal boiler or heating system rather than each flat having its own — check which applies before booking, since a fault or upgrade on a shared system usually needs freeholder or management company involvement, not just your own arrangement.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
What is a powerflush and do you need one?
A powerflush clears sludge and debris from radiators and pipework using a pumped chemical flush — often recommended if radiators are cold at the bottom or the system is noisy, and standard practice before fitting a new boiler onto an older system so it isn't immediately clogged.
What a good heating quote should include
A proper quote should specify the boiler make and model (not just "a combi boiler"), whether a powerflush is included, the warranty length, and what certificate you'll receive on completion. If a quote is missing the boiler model, ask before agreeing.