Why waterproofing (tanking) matters
Tanking is a waterproof membrane applied behind tiles, particularly around showers and baths, to stop water getting into the wall or floor structure below. Skipping this step is a common cause of hidden damp and rot that only becomes visible years later — worth confirming it's included, not assumed, in a refit quote.
Water-saving bathroom fittings
Dual-flush toilets, aerated taps and water-efficient shower heads reduce water usage without necessarily reducing how the fixture feels to use — worth asking about if reducing water bills or environmental impact is a priority, since the difference in fitting cost is usually small.
Bathroom condition and selling your home
A recently refitted, well-maintained bathroom is a genuine selling point, and any electrical certification from work done during the refit is worth keeping for buyers' solicitors. Visible damp or poor grouting, on the other hand, is one of the more common things a buyer's surveyor flags.
Disabled Facilities Grants for bathroom adaptations
A Disabled Facilities Grant can help fund accessibility adaptations like a level-access shower or grab rails, subject to a means-tested assessment via your local council — worth researching eligibility before assuming an adapted bathroom is unaffordable, since the process and criteria vary by council.
Common bathroom fitting jobs
Bathroom fitters handle everything from a single fixture swap to a full refit: removing and replacing suites, tiling, waterproofing (tanking) around showers, and coordinating the plumbing and electrical work a refit needs. Many fitters manage the whole job themselves and bring in a plumber or electrician for specific parts.
What affects the cost
Cost depends on whether pipework and electrics need moving (not just swapping fixtures in place), the tiling area, fixture quality, and whether structural changes are needed (like removing a bath for a walk-in shower). Moving a toilet's position, in particular, is one of the more expensive changes because of the soil pipe work involved.
Understanding the labour vs materials split
Tiles, the suite, and fittings are often a smaller share of the total cost than labour, particularly for a full refit involving tanking and tiling. A cheap quote is worth checking against the same fixture brands and tile spec as competing quotes, not just a lower labour rate.
Why bathroom electrics need a registered electrician
UK wiring regulations split a bathroom into zones based on distance from water, restricting what electrical fittings can go where. This makes bathroom electrical work notifiable under Part P — a fitter doing the tiling and plumbing will typically bring in (or should) a registered electrician for any new sockets, extractor fans or lighting circuits.