Weed prevention in driveways
Proper base preparation (a weed-suppressing membrane, adequate sub-base depth) prevents most weed growth from underneath. Weeds establishing in joints between blocks over time is normal and manageable with occasional treatment or re-sanding, not usually a sign of installation failure.
What affects the cost
Cost depends on material, driveway size, ground condition (excavation and disposal if the existing surface needs removing), drainage requirements, and access for machinery and material delivery. A driveway on a slope or with poor existing drainage costs more due to the groundwork involved, not just the surface material.
Driveway and path lighting
Outdoor lighting for a driveway needs weatherproof (IP-rated) fittings and, for anything beyond simple solar lights, a qualified electrician for the wiring — worth planning cable routes during driveway groundwork, since retrofitting cabling under a finished surface is far more disruptive.
Planning driveway width for parking
A single-width driveway needs roughly 2.4-3 metres to comfortably park and access one car; a double driveway for two cars side by side needs closer to 4.8-5.5 metres. Worth planning width around actual vehicle size and how many cars need to park, not just available space.
Best time of year for driveway installation
Tarmac and resin installation generally prefer drier, milder conditions for proper curing — many installers have a quieter season in deep winter, which can sometimes mean better availability and slightly better pricing, though weather delays are more likely too.
Driveway colour and finish options
Block paving and resin both come in a range of colours and finishes — beyond personal preference, a lighter colour shows dirt and staining more readily than darker options, worth considering for a low-maintenance preference alongside how it complements the property's exterior.
Common driveway and paving jobs
Driveway specialists cover new driveway installation (block paving, tarmac, resin, gravel), resurfacing an existing driveway, paths, and kerb dropping to create vehicle access from a road. Repairs to cracked or sunken sections are usually a smaller, separate job from a full installation.
Three steps to hiring the right driveway installer
First, ask to see photos of completed local jobs, ideally a few years old so you can see how the material has worn. Second, ask specifically about base preparation depth and method. Third, get a written quote covering groundwork, drainage and edging, not just the surface material.