Why Gas Safe registration is a legal requirement
Anyone installing, servicing or repairing a gas appliance or gas pipework in the UK must by law be on the Gas Safe Register, which replaced CORGI in 2009. This covers boilers, gas fires and gas cookers. Using an unregistered engineer for gas work isn't just risky, it's illegal, and any resulting certificate isn't valid.
What is a powerflush and do you need one?
A powerflush clears sludge and debris from radiators and pipework using a pumped chemical flush — often recommended if radiators are cold at the bottom or the system is noisy, and standard practice before fitting a new boiler onto an older system so it isn't immediately clogged.
What a good heating quote should include
A proper quote should specify the boiler make and model (not just "a combi boiler"), whether a powerflush is included, the warranty length, and what certificate you'll receive on completion. If a quote is missing the boiler model, ask before agreeing.
Heating emergencies — what to do
If you smell gas, don't use any electrical switches, don't light a flame, turn off the gas supply at the meter if it's safe to reach, and call the National Gas Emergency Service on 0800 111 999 before calling a heating engineer. For no heat or hot water without a gas smell, check the boiler pressure and any error code before assuming a full breakdown.
First fix and second fix heating work
On a new build or extension, "first fix" is running pipework to radiator and boiler positions before walls are closed up; "second fix" is fitting radiators, thermostats and the boiler itself once decorating is done. Getting boiler flue routing agreed early avoids conflicts with other trades later.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
Why an annual boiler service matters
An annual service checks for gas leaks, correct combustion, and general safety, and most manufacturer warranties require it to stay valid. It's also when a heating engineer is most likely to catch a developing fault — a failing part or a a pressure issue — before it causes a breakdown, particularly in winter when boilers are used hardest.
What affects the cost
Cost depends on the type of system (combi vs system vs conventional), whether it's a straightforward swap or a full system change, boiler brand and output size, and property access. Moving a boiler's location, rather than replacing it in place, adds cost because of the extra pipework, flue routing and making good involved.