Common roofing jobs
Roofers handle full re-roofs, repairs to individual slipped or cracked tiles, flat roof replacement, guttering, fascias and soffits, and leadwork around chimneys and roof valleys. Emergency work — storm damage, a leak during heavy rain — is usually handled separately from planned re-roofing.
Roof insulation, where it goes
Loft insulation (laid flat, cheap, effective) is different from insulating the roof slope itself (needed if the loft is being converted into living space). A re-roof is often the most cost-effective time to upgrade roof-level insulation, since the covering is already off.
Roofing felt vs breathable membrane
Older roofs often used bituminous felt underneath the tiles, which can perish and needs replacing during a re-roof; modern breathable membrane lasts longer and manages moisture better. If you're having a full re-roof, this underlay is worth confirming as part of the spec, not just the visible tiles.
Why roofing work is weather-dependent
Roofers generally can't safely work in high winds, heavy rain, or icy conditions, so scheduled roofing jobs sometimes shift by a few days around bad weather — factor this into timing if you need work finished by a specific date, particularly in autumn/winter.
Gutter clearing vs gutter replacement
Blocked gutters from leaves and debris are usually a clearing job, not a replacement one — worth getting cleared before assuming new guttering is needed. Persistent overflow even when clear, or visible sagging/cracking, points toward the guttering itself needing replacement rather than just clearing.
Roof orientation and solar suitability
A south-facing roof slope generally gets the most useful sun for solar panels, though east/west-facing roofs can still work reasonably well. A roofer or solar installer assessing suitability will look at pitch, orientation, shading from nearby trees or buildings, and roof structural capacity together.
Three steps to hiring the right roofer
First, check NFRC membership or equivalent trade body registration. Second, ask for photos of similar completed jobs, ideally local ones. Third, clarify what happens if underlying roof timbers turn out to need work once the old covering is removed — a very common mid-job discovery.
Leadwork around chimneys and valleys
Lead flashing seals the joins where a roof meets a chimney, wall, or valley — a very common source of leaks when it perishes or is poorly installed, even if the roof tiles themselves are fine. If a leak keeps recurring in the same spot near a chimney, it's often the leadwork rather than the tiles that needs attention.