Three steps to hiring the right heating engineer
First, confirm Gas Safe registration and ask to see the ID card, which lists exactly what gas work they're qualified for. Second, get a written quote naming the boiler model. Third, ask what the manufacturer's warranty requires (usually an annual service) to keep it valid.
First fix and second fix heating work
On a new build or extension, "first fix" is running pipework to radiator and boiler positions before walls are closed up; "second fix" is fitting radiators, thermostats and the boiler itself once decorating is done. Getting boiler flue routing agreed early avoids conflicts with other trades later.
Background checks and identity verification
Every Gas Safe registered engineer has an ID card with their registration number and the specific categories of gas work they're licensed for — ask to see it, and you can also check a registration number directly on the Gas Safe Register website before booking.
Common heating engineer jobs
Heating engineers install, service and repair boilers and central heating systems: annual boiler services, fault diagnosis, radiator installation and balancing, powerflushing, and full system replacements. Many also work on unvented hot water cylinders and, increasingly, heat pumps and other low-carbon heating.
When to replace vs keep existing radiators
Radiators themselves rarely need replacing unless damaged, corroded, or you're changing the property's heat demand (e.g. adding a heat pump, which often needs larger radiators to run at a lower temperature). A power flush can often extend a radiator's working life significantly cheaper than replacement.
What affects the cost
Cost depends on the type of system (combi vs system vs conventional), whether it's a straightforward swap or a full system change, boiler brand and output size, and property access. Moving a boiler's location, rather than replacing it in place, adds cost because of the extra pipework, flue routing and making good involved.
Boiler installation certificates, explained
A new boiler installation legally requires a certificate under the Gas Safety (Installation and Use) Regulations 1998, issued by the Gas Safe registered engineer who did the work. You'll need this when you sell the property, and some insurers ask for it if you make a claim involving the heating system.
Shared heating systems in flats and conversions
Some converted properties share a communal boiler or heating system rather than each flat having its own — check which applies before booking, since a fault or upgrade on a shared system usually needs freeholder or management company involvement, not just your own arrangement.