Bathroom lighting and IP ratings
Lighting near water (over a shower, close to a bath) needs to meet a minimum IP (ingress protection) rating for that specific zone — not every light fitting is suitable everywhere in a bathroom. This is part of what a registered electrician checks as part of the notifiable electrical work.
Three steps to hiring the right bathroom fitter
First, ask to see photos of similar completed jobs, ideally local ones. Second, clarify exactly who does the electrical and plumbing work — the fitter directly, or a subcontracted registered tradesperson. Third, get a written quote that separates labour, fixtures and tiling.
Why waterproofing (tanking) matters
Tanking is a waterproof membrane applied behind tiles, particularly around showers and baths, to stop water getting into the wall or floor structure below. Skipping this step is a common cause of hidden damp and rot that only becomes visible years later — worth confirming it's included, not assumed, in a refit quote.
Bathroom fitting in older properties
Older properties sometimes have uneven floors, narrower doorways, or pipework not originally designed for modern water pressure — a fitter working on a period property will usually assess these before quoting for anything beyond a straightforward like-for-like swap.
Planning bathroom storage during a refit
Built-in storage (vanity units, recessed cabinets) is far easier to plan during a full refit than to retrofit afterwards, since it often needs coordinating with tiling and plumbing runs. Worth deciding on storage needs before the layout is finalised, not after tiling is complete.
What affects the cost
Cost depends on whether pipework and electrics need moving (not just swapping fixtures in place), the tiling area, fixture quality, and whether structural changes are needed (like removing a bath for a walk-in shower). Moving a toilet's position, in particular, is one of the more expensive changes because of the soil pipe work involved.
Grout and sealant maintenance
Grout and silicone sealant are usually the first things to fail in a bathroom, well before the tiles or suite themselves — re-sealing around a bath or shower every couple of years, and re-grouting where needed, extends the life of the whole installation for relatively little cost.
Why bathroom electrics need a registered electrician
UK wiring regulations split a bathroom into zones based on distance from water, restricting what electrical fittings can go where. This makes bathroom electrical work notifiable under Part P — a fitter doing the tiling and plumbing will typically bring in (or should) a registered electrician for any new sockets, extractor fans or lighting circuits.