What is a powerflush and do you need one?
A powerflush clears sludge and debris from radiators and pipework using a pumped chemical flush — often recommended if radiators are cold at the bottom or the system is noisy, and standard practice before fitting a new boiler onto an older system so it isn't immediately clogged.
Three steps to hiring the right heating engineer
First, confirm Gas Safe registration and ask to see the ID card, which lists exactly what gas work they're qualified for. Second, get a written quote naming the boiler model. Third, ask what the manufacturer's warranty requires (usually an annual service) to keep it valid.
Aftercare after a boiler installation
You should receive a Benchmark commissioning checklist and a Gas Safety/Building Regulations certificate — keep both with your household paperwork. You'll need them to register the manufacturer's warranty (if not done automatically) and when you sell the property.
What size boiler do you actually need?
An oversized boiler costs more to buy and can run less efficiently; an undersized one struggles with demand, particularly hot water for multiple bathrooms. Sizing should be based on a heat loss calculation for the property and how many bathrooms/hot water outlets are used at once, not just the previous boiler's output copied across.
How long should a boiler last, and when to replace vs repair
Most boilers last 10-15 years with regular servicing. As a rough guide, if a repair would cost more than a third of a new boiler's price, or the boiler is over 10-12 years old and parts are getting harder to source, replacement is usually the better long-term value than another repair.
Gas fires and stoves — same Gas Safe rule applies
Installing or servicing a gas fire, gas stove, or gas oven/hob is gas work under the same legal framework as a boiler — it must be done by a Gas Safe registered engineer qualified in that specific appliance category, not just any gas-qualified engineer, since categories are appliance-specific.
Heating emergencies — what to do
If you smell gas, don't use any electrical switches, don't light a flame, turn off the gas supply at the meter if it's safe to reach, and call the National Gas Emergency Service on 0800 111 999 before calling a heating engineer. For no heat or hot water without a gas smell, check the boiler pressure and any error code before assuming a full breakdown.
What affects the cost
Cost depends on the type of system (combi vs system vs conventional), whether it's a straightforward swap or a full system change, boiler brand and output size, and property access. Moving a boiler's location, rather than replacing it in place, adds cost because of the extra pipework, flue routing and making good involved.