Bathroom ventilation, why it's required
An extractor fan (or adequate window ventilation) is a Building Regulations requirement in bathrooms, managing moisture that would otherwise cause mould and damage to fittings and decoration over time. A bathroom without a window typically needs a fan wired to run for a period after the light is switched off.
Disabled Facilities Grants for bathroom adaptations
A Disabled Facilities Grant can help fund accessibility adaptations like a level-access shower or grab rails, subject to a means-tested assessment via your local council — worth researching eligibility before assuming an adapted bathroom is unaffordable, since the process and criteria vary by council.
Three steps to hiring the right bathroom fitter
First, ask to see photos of similar completed jobs, ideally local ones. Second, clarify exactly who does the electrical and plumbing work — the fitter directly, or a subcontracted registered tradesperson. Third, get a written quote that separates labour, fixtures and tiling.
Why bathroom electrics need a registered electrician
UK wiring regulations split a bathroom into zones based on distance from water, restricting what electrical fittings can go where. This makes bathroom electrical work notifiable under Part P — a fitter doing the tiling and plumbing will typically bring in (or should) a registered electrician for any new sockets, extractor fans or lighting circuits.
Common bathroom fitting jobs
Bathroom fitters handle everything from a single fixture swap to a full refit: removing and replacing suites, tiling, waterproofing (tanking) around showers, and coordinating the plumbing and electrical work a refit needs. Many fitters manage the whole job themselves and bring in a plumber or electrician for specific parts.
What a good bathroom quote should include
A proper quote should specify the suite brand/model (not just "a toilet, a basin"), whether tiling and waterproofing are included, whether electrical and plumbing work is covered directly or subcontracted, and what happens if hidden pipework issues are found once the old suite is removed.
Why waterproofing (tanking) matters
Tanking is a waterproof membrane applied behind tiles, particularly around showers and baths, to stop water getting into the wall or floor structure below. Skipping this step is a common cause of hidden damp and rot that only becomes visible years later — worth confirming it's included, not assumed, in a refit quote.
Planning bathroom storage during a refit
Built-in storage (vanity units, recessed cabinets) is far easier to plan during a full refit than to retrofit afterwards, since it often needs coordinating with tiling and plumbing runs. Worth deciding on storage needs before the layout is finalised, not after tiling is complete.