Roofers in Addlestone

Local professionalsFree, no-obligation quotesDescribe your job once

Planning a repair or a full re-roof in Addlestone? Roofers can fix slipped tiles, renew felt, replace leadwork and repair flat roofs. Share the property height, roof shape and any fragile areas so quotes include access equipment and safe working time. Include photos where possible.

Need a roofer? Provide the roof type, age if known and where the problem shows up to receive focused quotes. Describe your job and get quotes from roofers.

Get quotes from local roofers

Describe your job below — it takes under a minute.

Start your enquiry

Get quotes from local roofers

Describe your job below — it takes under a minute.

Start your enquiry

What affects the cost

This checklist covers the main factors that affect scope and price.

  • Roof pitch and how it affects access and safety requirements
  • Total roof area and number of separate roof sections
  • Skip hire and disposal of old roofing materials
  • Whether existing insulation needs upgrading to current standards
  • Whether scaffolding or tower access is needed, and for how long
  • Material choice, such as concrete tile, natural slate, felt, EPDM or GRP
  • Height of the building and number of storeys

Typical UK pricing guide

Typical guide prices (ballpark):

Prices below are adjusted for the South East area, based on regional labour-cost data (ONS).

GBP 166-285 per sqm
GBP 415-1,659
GBP 259-2,074+
GBP 2,074-15,555+

Costs can change with property size, access, condition and whether making good is needed.

Hiring checklist

Use this checklist when comparing and hiring for your job.

ROOFING TIPS

Helpful guidance for your roofing work

Useful guidance to help you prepare, understand pricing and find a trustworthy Roofer.

HOME PROTECTION

Roofing emergencies — what to do

For a leak during a storm, contain the water inside (a bucket, moving belongings) rather than attempting a repair on a wet or high-wind roof yourself. Photograph any visible damage from the ground for an insurance claim before it's repaired. Tarping over a damaged section is a common temporary fix while a full repair is arranged.

USEFUL TO KNOW

Leadwork around chimneys and valleys

Lead flashing seals the joins where a roof meets a chimney, wall, or valley — a very common source of leaks when it perishes or is poorly installed, even if the roof tiles themselves are fine. If a leak keeps recurring in the same spot near a chimney, it's often the leadwork rather than the tiles that needs attention.

WORKMANSHIP STANDARDS

Insurance-backed guarantees, explained

An insurance-backed guarantee protects you if the roofing company goes out of business during the guarantee period — a separate product from the roofer's own workmanship guarantee. Not every roofer offers this; worth asking specifically for larger jobs like a full re-roof.

QUALITY & GUARANTEES

What a good roofing quote should include

A proper quote should specify materials (tile type, felt/underlay grade), whether scaffolding is included or separate, what happens to existing timbers if they're found to be rotten once work starts, and the guarantee length on both materials and workmanship.

WORTH KNOWING

Conservation areas and roofing materials

Even without individual listing, a property in a conservation area can have restrictions on visible roofing changes — different tile colours, added skylights on street-facing slopes, or replacing natural slate with a synthetic alternative. Check with your local planning authority before ordering materials.

PROFESSIONAL STANDARDS

Roof condition and selling your home

A roof's age and condition is a common point buyers' surveyors flag, and recent re-roofing work with a guarantee and paperwork can be a genuine selling point. Keep any invoices, guarantees and photos from roofing work done during your ownership.

GOOD TO KNOW

Slate, tile and other roofing materials

Natural slate is durable and often required on period or listed properties for appearance reasons, but costs more than concrete or clay tile. Metal (zinc) roofing suits modern extensions and flat/low-pitch areas. The right material often depends as much on the property's style and any planning restrictions as personal preference.

GOOD TO KNOW

Dormer windows and roofline alterations

A dormer window (as opposed to a flush skylight) changes the roofline itself and almost always needs both planning consideration and Building Regulations sign-off, unlike a straightforward re-roof. This is more involved than most roofing work and often overlaps with loft conversion specialists.

AREA GUIDE

About Addlestone

Addlestone is a town in Surrey, England, located about 18.5 miles south‑west of London and serving as the administrative centre of the Borough of Runnymede; it is the borough’s largest settlement and lies in postcode district KT15. As the local administrative hub, many council services for residents and businesses are delivered by Runnymede Borough Council. For homeowners and businesses in KT15, sourcing trades through that postcode will commonly find firms experienced with suburban Surrey housing, commuter‑belt demands and a mix of modern and older property types. Expectations when hiring include straightforward van access, a competitive market of local contractors, and the need to consider borough planning rules for extensions or listed‑building work — contractors registered for KT15 will typically know Runnymede’s procedures and permit requirements.


Roofing in Addlestone

Roofing work in Addlestone commonly covers both traditional repairs on older period homes and installations on newer suburban estates, so contractors should be adept at slate or clay tile matching as well as flat‑roof systems for extensions. Membership of recognised schemes such as the NFRC or the Competent Roofer scheme provides reassurance of standards and access to technical guidance, which is useful when matching heritage materials.

The relative ease of van access in KT15 usually simplifies scaffold placement and material deliveries compared with inner‑city sites, though formal scaffold plans and waste removal remain important for safety and neighbour impact. For older properties expect chimney and lead‑work repairs and for modern houses expect felt, EPDM or GRP solutions on small flat roofs. When getting quotes, ask roofers for membership evidence of NFRC/Competent Roofer, request examples of slate or tile matching if your home is period, and confirm who will manage scaffold and building‑control interactions.

More local services

Other trades in Addlestone

Help

FAQs

Is it better to repair or replace a roof when planning the work?
It depends on the age and condition of the covering. If damage is localised, a repair is often enough. If problems are widespread or recurring, a roofer may suggest partial or full replacement after inspection.
What information helps with a roofing quote?
Share the roof type, pitch and size, number of storeys, and any access limits. Photos of the affected area and any internal staining help define the scope and reduce follow up questions. Ask what is included, how long the work may take, and what happens if extra issues appear.
Do roofers work on flat roofs?
Many roofers do. They can repair or replace felt, EPDM or other flat roof systems, and advise on drainage and edge details. Access and the condition of the existing deck affect the approach. Photos and measurements can help the Roofer give clearer guidance.
Will scaffolding be needed?
Scaffolding is common for safe access, especially on multi storey homes or larger areas. a roofer can advise after viewing the roof and will usually include access needs in the quote. If relevant, confirm how services will be isolated and when they will be restored.
Can you replace a few damaged tiles when planning the work?
Yes, replacing small areas is common. a roofer will aim to match tiles or slates where possible and check the surrounding area for related issues. Share the age of the property, access, and what you want to change so the Roofer can plan the right approach.
What is roof flashing and why does it matter?
Flashing seals joints around chimneys, valleys and roof edges to prevent leaks. Damaged or loose flashing is a common cause of water ingress and can usually be repaired or replaced by a roofer. It helps to note any existing issues, recent work, and the areas involved.